Flex MXE 1000 Mixer
SKU: 495883
Brand: Flex
Out of stock
Key Features:
Flex MXE 1000 Mixer . Brushless motor with higher efficiency and longer service life. Robust 2-speed gearbox: generously dimensioned and optimally geared - for material-specific speeds and strong torque. Accelerator switch for a slow and sensitive start. Locking on/off switch. A protective cap over the motor housing directs the cooling air flow and prevents this ingress of splashing water. For mixed applications up to 30kg. With WR2 stirring rod for mixtures: pasty to tough. tile adhesive, grout, levelling compound, adhesive, ready-made plaster, adhesive, and mortar. Please telephone our sales office on 01565 344860 for more information.
Flex MXE 1000 Mixer
1010 watt 1-speed mixer with accelerator trigger switch.
Features
- Power consumption: 1010 W
- Power output: 550 W
- Voltage: 230 V
- Frequency: 50/60 Hz
- Max. mixing basket diameter: 120mm
- Tool holder, mixer: M14
- No-load speed, 1st gear: 0 - 780 rpm
- Clamping collar diameter: 53mm
- Cable length: 4.0m
- Dimensions WxLxH: 405 x 215 x 340 mm
- Weight: 4.5kg
Advantage
- Large, rugged single-speed gear unit with optimum gear ratio for high torque
- Full-wave electronic control: with soft start, temperature monitoring, overload protection and accelerator switch - for a controlled run-up to the optimum mixing speed. Sustained power in all speed ranges
- On/off switch with lock and protection at power interruption. Ideal for stationary operation in a mixing station
- The flexible rubber sleeve over the on/off switch prevents the ingress of dirt. No malfunctions caused by jammed switches
- Ergonomic handles on the drive unit: low weight, fatigue-free arm posture and upright body posture allow comfortable, ergonomic operation
- Four corner guards with rubber buffer provide secure storage during transportation and offer protection against shocks and impacts at the building site
- Protective cap above the motor housing guides the cooling air flow and prevents the ingress of splashing water
- For mixed applications up to 40 kg
- Proven standard mixer is ideal for users operating mainly in the low speed range
- With mixing paddle WR2 for mixture: pasty to tough. Tile adhesive, grout, filler compound, adhesive, finished plaster, adhesive mortar, ...
Specification
- No load speed: 0 - 780 RPM
- Power Input: 1010 watt
- Power Output: 550 watt
- Tool Fixture: M 14
- Clamping Collar: 53mm
- Max. Mixing Paddle: 120mm
- Cable Length: 4m
- Size (W x L x H): 405 x 215 x 340mm
- Weight (without mixing paddle): 4.5kg
Basic Equipment
1 open end wrench size 19
1 open end wrench size 22
1 helix stirrer WR2
Brand:
Flex
Weight (kg)
Additional information
Weight | 4.5 kg |
---|---|
Brands | Flex |
Dimensions (mm):
Additional information
Weight | 4.5 kg |
---|---|
Brands | Flex |
Categories:
SKU: