Grout Haze Remover | TT Paving Solutions

Grout Haze Remover from TT Paving Solutions is a professional-grade cleaning solution formulated to remove grout residue and haze from porcelain, stone, clay and concrete tiled surfaces. After installation or general cleaning, grout haze can leave a dull film that obscures the natural colour and texture of paving or tiles — this specialised formula dissolves that residue quickly and effectively without damaging the surface when used as directed.

Designed for both exterior paved areas and interior tiled floors, this grout haze remover is suitable for a wide range of materials commonly used in patios, porches, internal tiled rooms and commercial spaces. Its robust performance makes it a trusted choice for installers and DIY users who want a clean, clear finish after grouting.

Warning: always pre-test a small area. Never use on acid-sensitive surfaces.

Not sure if this is suitable for your paving? View our cleaning guide brochure here.

Key Benefits

• Removes grout haze and residue swiftly and effectively

• Suitable for use on porcelain and ceramic tiles (do not use on natural stone or cementitious materials)

• Works on outdoor patios, paved areas and internal tiled floors

• Professional-grade formulation trusted by installers

• Enhances the appearance and colour of the surface

How to use Grout Haze Remover

1. Depending on the level of soiling, dilute Grout Haze Remover to the correct dilution rates with either hot or cold clean water.
2. Sweep or use our Ventosa vacuum on the area to remove loose soils or debris.
3. Apply the cleaner to the surface and leave to act for 3 minutes, do not allow the product to dry into the surface.
4. Agitate the product into the surface using the TT Macchia machine or Deck brush.
5. Once the desired result is achieved, extract all soils with clean water using our Ventosa vacuum or mop and bucket, and use cloths to remove any leftover residue.
6. Repeat the process on extremely dirty surfaces.
7. Rinse well with fresh clean water to ensure all residue is removed and again use our Ventosa vacuum, sponges, or cloths. Use with 1 cap of Clean-It PH neutral cleaner to 5lt of fresh clean water – this will dry streak-free, no need to rinse.
8. Failure to follow the guidelines may result in damage to the surface.

https://www.youtube.com/watch?enablejsapi=1&autoplay=0&cc_load_policy=0&cc_lang_pref=&iv_load_policy=1&loop=0&rel=1&fs=1&playsinline=0&autohide=2&theme=dark&color=red&controls=1&disablekb=0&" class="__youtube_prefs__ epyt-facade no-lazyload">https://www.youtube.com/watch/maxresdefault.jpg" />

Coverage

Initial wash/grout haze removal - 1:5 -15m² (per litre)
Builders clean refresh - 1:10 - 30m²

Suitable For

• Porcelain tiles (internal and external)

• Natural stone paving and tiles

• Clay and concrete tiles

• Patios, porches, paved areas, kitchens, utility rooms and other tiled floors

Downloads

Grout Haze Remover Technical Data Sheet

TT Paving Solutions Datasheet

TT Paving Solutions Macchia and Ventosa Datasheet

TT Paving Solutions Cleaning chart

Warnings

Ensure Grout Haze Remover is stored in a cool dry place and kept away from heat at all times. Keep out of the reach of children and pets. Do not mix with other chemicals. If in contact with eyes, rinse with water. If irritation persists seek medical advice.

DANGER: IRRITANT
H314: Causes severe skin burns and eye damage.
P264: Wash hands thoroughly after handling.
P280: Wear protective gloves/eye protection.
P305-351-338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P405: Store locked up.

CONTAINS:
Orthophosphoric acid <30%.

Must read entire label and technical data sheet before use. It is the user's responsibility to determine the suitability of the product for the intended use.

Visit our YouTube channel to see our solutions in action with before and after images.