
Raimondi RLS Levelling System HD Clips (2mm)
Raimondi RLS Levelling System HD Clips (2mm)
Key Features:
The new RLS levelling system HD clips offer the highest tensile strength within Raimondi's range of clips and are suitable for tiles up to 12mm thick and create a 2mm joint. In addition, the design of the new clips makes them much easier to insert underneath the tiles. The new RLS clips work with the same wedges and traction pliers as all the other clips. Please call our sales office on 01565 344860 if you would like more information.
RLS Levelling System
The new RLS levelling system HD clips offer improved tensile strength and are intended for use with the Raimondi Levelling System.
These clips are suitable for tiles up to 12mm thick and are for a 2mm joint.
How to use
Step 1
After spreading your tile adhesive, first, insert a levelling spacer underneath the tiles along the 4 sides. Next, use traditional spacers as you normally would to square up the corners. For larger tiles, you may have to “double-up”, using two levelling spacers for each side.
Step 2
Set the tile and beat it with a rubber mallet.
Step 3
Use special traction-adjustable pliers to insert the wedge into the levelling spacers. You should pay attention not to pass the breakpoint.
Step 4
After waiting for the tile adhesive to set, you should remove the levelling spacers. You can use either the traction-adjustable pliers, a rubber mallet, or kicking them out with your feet.
How to insert the wedge
- Insert the wedge in the support slot, taking care not to pass the breaking point.
- To facilitate this operation, we recommend using the special traction-adjustable-pliers.
How to remove the support
Finally, once the adhesive is set, you should remove the protruding part of the support by separating it from the base. You can do this by using the traction-adjustable-pliers, with a rubber mallet or even with feet. Then beat the spacer until it is parallel to the joint.
Visit our YouTube channel for other videos on our products.
Brand:
Raimondi
Weight (kg)
Additional information
Weight | N/A |
---|---|
Dimensions | N/A |
Industry | Tilers and Builders |
Brands | Raimondi |
Qty. | 250 pcs, 500 pcs, 2200 pcs |
Dimensions (mm):
Additional information
Weight | N/A |
---|---|
Dimensions | N/A |
Industry | Tilers and Builders |
Brands | Raimondi |
Qty. | 250 pcs, 500 pcs, 2200 pcs |
Categories:
SKU: